Diamond Polishing Dry Pad

• Place of Origin:

   China

• Type:

  Diamond Tools and Consumables

• Genre:

  Diamond Tools, Consumables and Stone Care Products

• sCode:

  STPR1283155

• Place of Origin:

  China
• Polishing pad is a kind of diamond pad that its face is working layer which has straight or curved radiate slots, and its back is nylon agraffe with soft nap. Its thickness is 2.2mm, 3mm or 4mm and it can be bent or distorted freely. It can process marble, granite, ceramic, and other hard and fragile material, as well as non-iron metal. It is widely used to polish stone, porcelain profiles, ceramic tile floors, all kinds of table-boards and stone sculptures. Our company is one of the earliest domestic companies to explore diamond flex pad and substitute importation successfully.
  
  They are suitable for hand power machines with the power is 750W to 1500W that run up to a speed of 2000-10000 rpm. The pad link with machine through backer, which one side connects with machine and the other side is adhibited by nylon agraffe tache that to joint with pad's soft nap. The soft baker is for grinding curves while the hard baker is for grinding plane.
  
  The process procedure: The operator sticks the flex pad on the grinding machine, and then brings to bear some pressure to the machine to grind stone surface for five times come-and-go, at the same time, the operator must immits water into the backer continuously during the operation. Then, the operator should change the finer pad. The type of pads is from #50, #100, #200, #400, #800, #1500, #3000, #5000 to white/black buff in turn. According to the stone's quality and operator's experience, the worker can cut down procedures of using some types. White buff for light color, and black buff for dark color.
  Flex polishing pad's type is usually distinguished by the color of the nylon agraff. Most flex pads are needed to be immitted water during the operation, so they are also called wet pads.
  
  Measly water is immitted from #1500, and to the buff, less water is needed to wet the stone surface. This is to bring more friction resistance, and leads to hotness of the surface. Then stone surface is easily to be wiped off because of intenerate caused by momentary high temperature. The stone cannot be grinded dry long time for it will result in burning or pigmentation. If burning appears, the worker must do work over again from #200 at least, and if the pigmentation appears, it must be from #400.
  
  Some special floors (eg. Hotel's stone floorboard) are not allowed to grind wet, at this time, the dry pad is used. Ordinarily, dry pad will not cause burning and pigmentation because of using the special bond type to make the surface intenerated and pealed off as well as to avoid hotness of surface. Of course, the grinding could not be too long.
  
  Other specification can be ordered by customer.